← Tous les termes
CATÉGORIE: QUALITY SYSTEMS
Validation de stérilisation
Le processus documenté établissant qu'un procédé de stérilisation produit systématiquement un produit stérile.
Last reviewed 2026-08-05 · Reviewed by MedFlux Editorial Board · Editorial policy
Expanded process notes below are currently maintained in English; the short definition above is localized. See our editorial policy.
WHEN IT APPLIES
Sterilization validation is required when a device is labeled sterile or when sterile barrier systems are critical to patient safety. Methods include ethylene oxide (EO), radiation, steam, and others validated to recognized standards.
PROCESS / STEPS
- Select method based on materials, bioburden, and packaging.
- Establish sterilization process parameters and SAL (typically 10⁻⁶ for terminally sterilized devices).
- Perform IQ/OQ/PQ and microbiological validation (e.g., half-cycle method for EO).
- Define routine monitoring, revalidation triggers, and residual limits where applicable.
EXAMPLES
- Single-use catheters often use EO sterilization with validated aeration and residual EO testing.
COMMON MISTAKES
- Changing packaging materials without revalidation.
- Ignoring worst-case load configurations in PQ.
RELATED GUIDES & TOOLS
SOURCES
Track regulatory signals related to Validation de stérilisation across 27 authorities in real time.
START FREE →